Advantages
+ASOS proven technology with years of experience |
+Measures instantaneous rain and snow rates |
+Remote maintenance monitoring (RMM) |
+Widest dynamic range of any present weather sensor |
+ |
+RS-232 output with simple protocol |
LEDWI® is the premiere MIL-SPEC sensor on the market today with almost 1000 installed. Look at the weather observation system in any major airport in the US and you will find the LEDWI®. It is the only present weather sensor selected for the ASOS Program and meets NWS Spec. No.S100-SP001. LEDWI® was also the first present weather sensor to meet the requirements of FAA AWOS Advisory Circular No. 150/5220-16A. They report precipitation occurrence, precipitation type, precipitation intensity and precipitation accumulation in WMO or NWS weather codes.
The LEDWI® is our top-of-the-line weather instrument with regard to durability and reliability. These sensors are designed to the specifications and demands of the National Weather Service to operate 24 hours a day, 7 days a week. The ASOS program's main purpose is to provide remote sensor weather information for airport and air transportation safety. If pilots and air traffic controllers rely on the LEDWI®, so should you.
LEDWI® is the obvious choice when a full featured present weather sensor is required. LEDWI® clearly demonstrated it's capability when it was chosen to help upgrade weather observations at over 1000 U.S. airports and it will continue to be the best present weather sensor available into the 21st century!
Full EMI Protection - Tested for susceptibility at levels up to 200 V/M. |
External Hood Heaters - Prevent snow blockage for operation in adverse winter conditions.
Extended Temp. Range - Full operational performance down to -50 C.
More Than 15 Million Hours Of Field Operation! - Almost 1000 sensors installed from sub arctic Alaska & Canada to semitropical Florida to arid Arizona & New Mexico. Sensors are also installed at sites in the U.K., France, Taiwan, and Japan.
Ordering Information |
Specify OWI-220-xR where "x" = |
»A for 115 VAC |
»B for 230/240 VAC |
»C for 100 VAC |
»E for 220 VAC |
Options |
-QCS-220 QwikCollect Software for LEDWI |
-TST-220 LEDWI Field Calibration Kit |
-HIP-100 Hail & Ice Pellet Sensor for LEDWI |
-FSM-100 LEDWI Mounting Pole |
Contact factory for special options such as relay outputs, limited distance modems, etc.
Specifications
Performance Specifications |
|
Rain Dynamic Range | 0.25 to 3000 mm/hr |
Snow Dynamic Range | 0.05 to 1000 mm/hr (water equivalent) |
Electrical Specifications |
|
Power Requirements | Factory selectable, 100/115/220/230 VAC, 50/60 Hz @ 80 VA nominal, 20 VA max |
Transient Protection | Power & signal lines protected |
Signal Output | RS-232 ASCII |
Environmental Specifications |
|
Temperature Range | -50 to 50º C |
Humidity Range | 0-100% |
Precipitation/Dust | NEMA-4 type protection |
Physical Specifications |
|
Head Size | 1.2 m x 584 mm x 76 mm |
Enclosure Size | 584 mm x 406 mm x 280 mm |
Head Weight | 9 kg |
Enclosure Size | 19 kg |
Head & Enclosure Cable Length | 4 m |
Present Weather Codes | More than 50 NWS and WMO codes |